o ring

Kits consist of: Vent disc, Check disc and Bonnet O-ring.

组件包括: 排气阀瓣, 止回阀阀瓣和阀盖O形环.

Experimental research on load decay of two kinds of O ring made of different silicone rubber under different temperature has been conducted.

对两种硅橡胶材料O形圈的载荷衰减规律进行了试验研究，结果发现，O形圈的载荷衰减规律与O形圈材料的性能有关；

The analysis method in this paper is conducive to the correct selection of O ring seals especially in case of important applications.

为重要场合下O形密封圈的正确选用提供了一种方法。

Kit includes: Disc assembly, Spring assembly and Cover O-ring.

组件包括: 阀瓣总成, 弹簧总成和阀盖O形环.

The work design and structure of o ring conveying rubber belts for special continuity were studied in this paper.

研究了有特殊连续性要求的环形输送带带芯的结构设计及施工设计。

Experimental Study of Effect of Atomic Oxygen Erosion on Rubber O-ring

O型圈的原子氧剥蚀效应实验研究

Hermeticity analysis on the bounce-back process of O ring

橡胶密封圈在回弹过程中的密封性能分析

Kit consists of: Relief Valve Assembly, RV Spring, and RV Cover O-ring.

组件包括: 安全阀总成, 安全阀弹簧, 和安全阀阀盖O形环.

Kit includes: Seat, Seat oring, Retainer Wire and Cover O ring.

组件包括: 阀座, 阀座O形环, 固定器线圈和阀盖O形环.

If O-ring is to be replaced, lubricate as above.

如果更换O 形 环, 也要向上述那样润滑.

Valve should be tighten with O ring rubber with max . 25 % compression.

阀门的密封需通过“O”型密封圈实现,密封圈最大压缩量不允许超过25%.

Remove the pressed in valve seat and seat O-ring.

拆卸压进去的安全阀阀座和阀座O形环.

Kits include: Disc & Spring assembly, Cover O-ring and lubricant.

组件包括: 阀瓣 和 弹簧总成, 阀盖O形环和润滑剂.

Design of an Expansion Joint With O-Ring and its Finite Element Analysis

O形环膨胀节的设计与有限元分析

Effect of flange deformation on seal of O ring

凸缘边变形对O形圈密封的影响

Analysis of Positioning Error in O-Ring Mould and Design of A New Positioning Way

O形圈模具定位误差分析

How to fully use the o sealing ring function effect

O形密封圈功能的充分发挥

Design and Application of the Expansion Joint with O-Ring

O型环膨胀节的设计与应用

Kits consist of: Bonnet, Bonnet O-ring and vent spring.

组件包括: 阀盖, 阀盖O形环和排气口弹簧.

O-ring of the spindle or core hole of body is damaged.

轴心使用O环受损或主体心孔损伤.

Lubricate new O-ring Seal with Mopar Power Steering Fluid or equivalent.

用mopar动力转向油液或同类产品润滑新的O型环油封.

Remove the relief valve assembly ( includes cover O-ring, stem and diaphragm assembly ).

拆卸安全阀总成 ( 包括阀盖O形环, 阀杆和隔膜总成 ).

Seal Performance Analysis of O-Ring Between Stainless Steel and Aluminum Alloy

不锈钢与铝合金材料之间密封用O形环性能分析

An Analysis for Finite Elastoplastic Deformation and Cyclic Relaxation of Confined O Ring for Pressure Vessel

O形密封环的弹塑性大变形和循环松弛分析

Study on Structure of O Ring Seal

O形橡胶密封圈封油结构研究

Lubricate O-ring with power steering fluid and install into the housing.

用动力转向油润滑O型环,并将其安装在外壳上.

Processing of multichamber mould for rubber sealing O ring

O形橡胶密封圈多腔模具的加工工艺

The application of rubber O ring static seal at cryogenic temperature

橡胶O形环在低温静密封中的应用

The O-ring seal material shall be manufactured from EPDM.

形环密封材料应该由三元乙丙橡胶制造.

The sealing structure and principle of hollow metal O ring was introduced.

介绍了金属空心O形圈的密封结构和密封机理.